1×1 Single-Display Formation; 2×2 Multiple-Display Formation - Panasonic TY-CF55VW50 Montageanleitung

1×1 Single-display Formation
Item Description
Top Frame / Bottom Frame
A
Right Frame / Left Frame
B
L-Corner
C
Screws
E
1. Attach the Top and Bottom Frames
screws .
E
2. Attach the L-Corners to both sides of Right Frames
C
and Left Frames .
B
3. Attach the Right and Left Frames
screws.
NOTE: This 1×1 formation rquires one basic-composition kit.
Four T-Joints D will be left unused.
2×2 Multiple-display Formation
Item Description
Top Frame / Bottom Frame
A
Right Frame / Left Frame
B
L-Corner
C
T-Joint
D
Screws
E
1. Attach four T-Joints for each frame.
D
2. Attach four Top and Bottom Frames
screws .
E
3. Attach four L-Corners
C
4. Attach four Right and Left Frames
screws .
E
NOTE: This 2×2 formation rquires two basic-composition kits.
Four L-Corners C and four T-Joints
NOTE
Gap occurs between the cover frame and panel when it is
assembled, but, it is not a problem.
The purpose is to prevent damage due to the heat of the
panel when power is ON.
Quantity
2
2
4
16
with supplied
A
with supplied
B
Quantity
4
4
4
4
32
with supplied
A
to four edges.
with supplied
B
D will be left unused.
E
TH-55LFV50
TH-55LFV5
B
C
B
C
E
TH-55LFV50
TH-55LFV5
C
B
D
B
C
TH-55LFV70
A
A
TH-55LFV70
A
D
A
A
D
A
C
B
C
E
C
B
D
B
C
E
5