Foreword Dear Customer, By purchasing this WLAN IP Camera 150 Mbps, you have decided in favour of a quality product from Hama that corresponds to the latest development standards with respect to technology and functional performance. Please read the information contained in this user manual to familiar- ise yourself quickly with the device and be able to make full use of its functions.
► Observe any special regulations on video surveillance in indus- trial, commercial and public areas. ► Video surveillance does not exempt you from your duty to exercise due diligence, or from your welfare and supervisory obligations. 00053157...
A warning of this category indicates potential material dam- age. If the situation is not avoided, it may lead to material damage. ► Follow the instructions in this warning to avoid material damage. NOTE ► A note indicates additional information that simplifies the use of the device. 00053157...
Do not use this device if the mains adapter, power cable or plug is damaged. ► Do not open the housing of the mains adapter. Danger of elec- tric shock if live connections are touched and/or the electrical and mechanical configuration is changed. 00053157...
Do pull on the power cable to remove the mains adapter from the mains socket ■ Electronic devices are delicate, so avoid knocks and blows. ■ Disconnect the mains adapter from the mains socket in the event of faults or during thunderstorms. 00053157...
Blue LED: status Green LED: network Description Lights up continuously: system is switched on Status Flashes slowly: camera is booting Flashes fast: camera is waiting for WPS connec- tion Network Lights up continuously: network is connected Flashes: network access 00053157...
RJ-45 network connection Designation Description Press the reset button for at least 5 seconds to Resetting revert to the factory settings. Briefly press the WPS button on the camera and the device to be connected to establish a wireless connection. 00053157...
Tripod and installation material ● Mains adapter ● RJ-45 network cable ● Installations CD ● User manual NOTE ► Check for visible signs of damage or missing items on delivery. Report incomplete or damaged items to your supplier/retailer immediately. 00053157...
WLAN antenna can have an adverse affect on the wireless transmission. ■ The mains socket must be easily accessible so that the mains adapter can be quickly unplugged in the event of an emergency. 00053157...
Make sure that the power cable is not stretched tightly or twisted. ■ Do not allow the adapter cable to hang over edges (danger of tripping). ■ If the device is not to be used for a longer period of time, discon- nect the mains adapter from the mains supply. 00053157...
► . network LED flashes during access to the net- work. Startup Switching the device ON and OFF NOTE ► The device has no ON/OFF switch. Disconnect the mains adapter from the mains socket to switch off the device. 00053157...
The display of the menus may differ according to operating system. The following illustrations relate to a clean installation of the respective operating system. Place the programme and driver CD supplied into the CD drive of your computer. The installation programme starts automatically. 00053157...
Seite 15
Select your preferred language for installation by clicking one of the displayed languages (A). If you wish to cancel the installation, click the "Exit / Beenden / Terminer" button (B). NOTE ► The following examples are based on the German language version. 00053157...
Seite 16
CD. Click the button (E) for this purpose. Click the button (D) to download the latest software and firmware from the Hama website. Click the button (F) to return to the "Welcome" page. 00053157...
Under Windows Vista and Windows 7, click "Continue" in the "User account control" dialogue". Click the "Next" button. You can enter the target folder for the software installation, click on the "Browse" to search for a folder or use the standard folder. Click "Next" to continue. 00053157...
Seite 18
Click "Next" to start installing. The install files are unpacked and the configuration software is in- stalled onto your computer. Click the "Finish" button to complete the installation, exit the in- stall programme and start the "IPCam Admin Utility" programme. 00053157...
Appropriate devices detected in the network are listed in the main window of the programme. NOTE ► If the device is not recognised after about 1 minute, check the power supply and network connection to the device. The yellow network LED must light up constantly. 00053157...
– Search Camera: refreshes the device list – Browse Camera via Web: starts the user interface C – Configure Camera: configures the network and security settings D – Language selection NOTE ► If no device was selected, only "Update the device list" (A) is available. 00053157...
Network type Switch on the "Static IP address" if IP ad- dresses in your network are statically as- signed. Enter the static IP address of the device. The IP address IP address must match the address space of your network. 00053157...
Enter the user name that is required here to login to the user interface. Enter the ID once again to rule out typing Confirm ID errors. Click the "OK" button to save new settings to the device. 00053157...
Confirm entry by pressing the Enter key. NOTE ► If you did not assign 80 as port number for the device during configuration, you must state the changed port before load- ing. http://192.168.2.3:port number 00053157...
Enter your user name into field A. Enter your user ID into field B. NOTE ► Pay attention to upper and lower case characters. ► When logging in for the first time enter admin into the filed and the password 1234 into the field. 00053157...
► Parts of the user interface may be deactivated depending on the user group of the logged-in user (administrator, user and guest). More information in user management can be found in the sec- tion The menu items - account. 00053157...
Configure wireless network settings Video Configure video settings Email / FTP Configure email and FTP server settings Motion detection Setting up motion detection Schedule Create schedule System Configure general settings Status Displaying device information Account Manage user accounts Display activity protocols 00053157...
Click the input field and select a folder for storing the snapshot. Create a snapshot of the current video image Snapshot by clicking the "Take snapshot" button. The snapshot is stored as a JPEG-file in the selected folder. 00053157...
Seite 28
If you wish to move this area, click the square and drag it to the desired location. Click the button to exit the digital zoom Adjust to Click this button to adjust window the image to the window size. 00053157...
This IP address is normally the same as the IP address of the gateway. Enter the IP address of a backup DNS server Secondary DNS here. If the primary DNS server is not avail- able, the device will then use this address. 00053157...
Seite 30
RTSP path Enter the path for the RTSP stream here. Enter the port space for the RTP. The default RTP port space setting is 50000 to 60000. Click the "Use" button to save the new settings to the device. 00053157...
Enter the corresponding user name for the DynDns account. User name Enter the corresponding password for the DynDns user account here. Enter the domain name for your DynDns user account here. Click the "Use" button to save the new settings to the device. 00053157...
Seite 32
Field Remark Enter the file name here. If you don wish File name to use this function, leave the field empty. Click the "Use" button to save the new settings to the device. 00053157...
Field Remark A random eight-digit PinCode is displayed here. If the router or access point that is Self PinCode used for establishing a connection sup- ports the PinCode procedure, enter this code into the WPS configuration. 00053157...
Seite 34
Select "Activate" if you wish to operate Wireless connection the device via WLAN and "Deactivate" to switch the function off. Select the network connection type here: infrastructure for connection to a router/ access point. Network type Adhoc for direct connection to another WLAN-capable device. 00053157...
Seite 35
The following is Authentication available: none, open system, shared key system, WPA-PSK and WPA2-PSK. Select the encryption type for your net- work from the list of available encryption Encryption type methods. The following can be selected: none, WEP, TKIP and AES. 00053157...
Seite 36
Select the code index 1-4 for WEP encryp- Default key tion. Enter the WEP key 1-4 of the selected WEP key 1-4 network. NOTE ► Pay attention to upper and lower case characters. Click the "Use" button to save the new settings to the device. 00053157...
MPEG4 video encoder here. Field Remark Select the video resolution for the MPEG4 video encoder here. The following options are available: VGA, QVGA and QQVGA. Video resolution VGA resolution displays more details than QVGA but requires more network bandwidth. 00053157...
Seite 38
Select the refresh rate for the MPEG4 video encoders here. Refresh rate A higher refresh rate provides more accurate information on movement but requires more network bandwidth. Click the "Use" button to save the new settings to the device. 00053157...
Seite 39
Select the refresh rate for the MJPEG video encoder here. Refresh rate A higher refresh rate provides more accurate information on movement but requires more network bandwidth. Click the "Use" button to save the new settings to the device. 00053157...
Enter the SMTP user name for SMTP server User name authentication here. Enter the SMTP user ID for SMTP server authentication here. Click the "Use" button to save the new settings to the device. Then click "Send test email“ to test the email settings. 00053157...
Seite 41
Select Passive mode "Deactivate" if you do not wish to use passive mode. Click the "Use" button to save the new settings to the device. Then click "Upload test file" to est the FTP settings. 00053157...
The FTP server settings Send snapshot to FTP are performed in the FTP configuration submenu. Switch on the No" control to deactivate this function. Click the "Use" button to save the new settings to the device. 00053157...
Seite 43
You can set the sensitivity for detecting Sensitivity motion here. Click this button to update the image so Refresh that you can make real-time adjustments to the regions for motion detection. Click this button to save the current Save region settings. 00053157...
Activate Switch on this control if the email sched- email schedule ule is to be activated. Select the time interval between two Time interval emails. Click "Accept" to use and save the settings. 00053157...
Enter the user name that is required here to login to the user interface. Enter the ID once again to rule out typing Confirm ID errors. Click the "Use" button to save the new settings to the device. 00053157...
If not, switch time adjustment on the "No" control. Click the "Use" button to save the new settings to the device. Click the "Synchronise with PC time" if the time is to be synchro- nised with the connected PC. 00053157...
► Ensure that the firmware file matches the device. If in doubt, consult Hama product support. ► Before beginning a firmware update, establish connection to the device via a cable if there is danger of loss of WLAN connection during data transmission.
Seite 48
Switch off the device LEDs by pressing the "Switch off LED" but- ton. NOTE ► Switching off the LEDs makes sense if you do not wish others to see that data is being transmitted. ► Click the "Switch on LED" button to switch them on . 00053157...
Enter the name of the user into this User window. Enter the corresponding ID here, Confirm ID Repeat the ID here. Select "User" so that this user can change the settings of the device. If you Authority select "Guest", the user will only see the image. 00053157...
Click the "Change" button to change the specifications of an exist- ing user. Click the "Remove" button to remove an existing user from the list. All device activity is logged. The system log file is displayed in the Log menu. Click "Update" to update the list. 00053157...
Operation and configuration Factory settings The device has the following configuration on delivery and after it is reset: Field Remark IP address 192.168.2.3 Subnet mask 255.255.255.0 Gateway Is assigned dynamically DHCP Deactivated DDNS Deactivated Administrator name admin Administrator ID <1234> 00053157...
Establish a connection to Wrong WLAN set- your device via LAN first of tings all. Set up the WLAN con- nection afterwards. NOTE ► If you cannot resolve the problem with the steps described above, please contact customer service. 00053157...
Utility" programme if the ActiveX components are missing. Select ActiveX mode during login with the Internet Explorer. If you are using another browser, it is possible that ActiveX compo- nents cannot be used for security reasons. Select the the server push mode for the browser during login. 00053157...
Seite 54
Answer: Some browsers doe not allow the use of ActiveX components. The functionality of the browser must be extended for ActiveX to use all of the programme functions. In this case, use Internet Explorer. 00053157...
In the event of product complaints, please contact your retailer or Hama product support. Internet/World Wide Web: Product support, new drivers or product information can be obtained from www.hama.com Support hotline – Hama product support: Tel. +49 (0) 9091 / 502-115 Fax +49 (0) 9091 / 502-272 Email: produktberatung@hama.de 00053157...
60 x 92 x 22 mm Weight (including acces- approx. 195 g sories) Electrical ratings Power supply 5 VDC, 1.0 A max. Power consumption 5 W (typical) Environmental conditions Operating temperature 0 ... 40 °C range relative humidity 10 ... 90 % (non-condensing) 00053157...
Seite 58
Hinweis zum Umweltschutz: Ab dem Zeitpunkt der Umsetzung der europäischen Richtlinie 2002/96/EG und 2006/66/EG in nationales Recht gilt folgendes: Elektrische und elektronische Altgeräte sowie Batterien dürfen nicht mit dem Hausmüll entsorgt werden. Der Verbraucher ist gesetzlich verpflichtet, elektrische und elektronische Geräte sowie Batterien am Ende ihrer Lebensdauer an den dafür eingerichteten, öffentlichen Sammelstellen oder an die Verkaufsstelle zurückzugeben.
Seite 59
Wskazówki dotyczące ochrony środowiska: Od czasu wprowadzenia europejskiej dyrektywy 2002/96/EU i 2006/66/EU do prawa narodowego obowiązują następujące ustalenia: Urządzeń elektrycznych, elektronicznych oraz baterii jednorazowych nie należy wyrzucać razem z codziennymi odpadami domowymi! Użytkownik zobowiązany prawnie do odniesienia zepsutych, zniszczonych lub niepotrzebnych urządzeń elektrycznych i elektronicznych do punktu zbiórki lub do sprzedawcy.
Seite 60
Urządzenia można we Francji użytkować tylko w zamkniętych pomieszczeniach! Hama GmbH & Co. KG oświadcza niniejszym, że urządzenie to spełnia podstawowe wymagania i pozostałe właściwe postanowienia dyrektywy 1999/5/WE. Deklaracja zgodności wg dyrektywy 99/5WE dotyczącej urządzeń radiowych i telekomunikacyjnych dostępna jest na stronie www.hama.com Hama GmbH &...