Siemens SITRANS F-Serie Bedienungsanleitung Seite 16

Installation
2.2 Mounting the Transmitter
Pipe Mounting
For installation on 2-inch pipe use Pipe Mount Kit CQO:1012XMB-1 See figure below.
①
②
③
Figure 2-1
14
Clamp
Mounting Bracket (Hardware not supplied for
wall mounting.)
Pipe
Pipe Mounting and Mounting Bracket Locations
④
U-Bolt Assembly for standard 2-inch
(2.38in/6.0452cm) standpipe. (Hardware
supplied.)
⑤
Sensor Cable Entry Ports
⑥
Position Plastic Strip Under Clamp
FUH1010 IP65 NEMA 7 Interface Detector Quick Start
Operating Instructions, 06/2014, A5E02428148-AA