Specification; General Safety Rules - Makita 2107F Betriebsanleitung

ENGLISH
1 Lock button
2 Switch trigger
3 Speed adjusting dial
4 Lamp switch
5 Loosen
6 Tighten
7 Protrusion
8 Lever
9 Blade

SPECIFICATION

Max. cutting capacity
Blade size
Overall dimensions
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for cutting in wood, plastic and fer-
rous materials.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
Explanation of general view
10 Bearing
11 Upper holder
12 Lower holder
13 Wheel
14 Press
15 Screw
16 Stopper plate
17 Blade
18 Cutting wax
Model
Rectangular workpiece
Blade speed
Net weight
Safety class
19 Tire
20 Lip
21 Fluorescent tube
22 Lamp box
23 Tapping screw
24 Limit mark
25 Screwdriver
26 Brush holder cap
Round workpiece
Length
Width
Thickness
H x W x L
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
2107F
120 mm dia.
120 mm x 120 mm
1.0 – 1.7 m/s
1,140 mm
13 mm
0.5 mm
496 mm x 184 mm x 249 mm
5.7 kg
/II
5