Introduction; Intended Purpose - Parkside PMNF 1350 D4 Originalbetriebsanleitung

GB MT
Content
Introduction ............................... 22
Intended purpose ....................... 22
General description .................... 23
Extent of the delivery ......................23
Functional description .....................23
Overview ......................................23
Technical data ............................ 23
Notes on safety.......................... 24
Symbols and icons .........................24
General Safety Directions for
Power Tools ..................................25
Safety instructions for cutting ...........27
Additional safety instructions for
all applications ..............................29
Additional safety information ...........30
RESIDUAL RISKS ............................30
Assembly ................................... 30
Installing/changing disc .................30
Vacuuming ....................................31
Operation .................................. 32
Turning on and off ..........................32
Handling ......................................33
Cleaning and servicing ............... 33
Cleaning .......................................33
Storage ...................................... 33
Troubleshooting ......................... 34
Waste disposal and
venvironmental protection ......... 34
Guarantee ................................. 35
Repair Service ............................ 36
Service-Center ............................ 36
Importer .................................... 36
Replacement parts/Accessories .. 37
Translation of the original EC
declaration of conformity ............ 57
Exploded drawing ..................... 61
22

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a inal inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications speciied.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended purpose

The wall chaser is a tool for cutting mainly
mineral-based materials (such as concrete
or brick) without requiring the use of water.
This tool should only be used with diamond
cutting disks.
The tool should not be used in any other
application (e.g. cutting with coolant solu-
tions, cutting harmful substances such as
asbestos).
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use. The tool is to be used by
adults. Children over the age of 16 may
not use the tool except under supervision.
The manufacturer is not liable for damages
caused by an improper use or incorrect
operation of this device.