Storage; Troubleshooting - Philips AC0819 Benutzerhandbuch

6 Storage

1
Turn off the air purifier and unplug from the power socket�
2
Clean the air purifier, air quality sensor and the surface of the filter (see
chapter 'Cleaning')�
3
Let all parts air dry thoroughly before storing�
4
Wrap the filter in air tight plastic bags�
5
Store the air purifier, filter in a cool, dry location�
6
Always thoroughly wash hands after handling a filter�
7

Troubleshooting

This chapter summarizes the most common problems you could encounter
with the appliance� If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country�
Problem
The appliance
does not work
even though it is
plugged in�
The airflow that
comes out of
the air outlet
is significantly
weaker than
before�
The air quality
does not improve,
even though the
appliance has
been operating
for a long time�
Possible solution
• The filter replacement alert is on but you have not
replaced the corresponding filter� As a result, the
appliance is now locked� In this case, replace the filter
and reset the filter lifetime counter�
• The surface of the filter is dirty� Clean the surface of the
filter (see the chapter "Cleaning")�
• Check if the packing material is removed from the filter�
• Make sure that the filter is properly installed�
• The air quality sensor is dirty or wet� Clean the air
quality sensor (See the chapter "Cleaning")�
• Room size is large or the outdoor air quality is poor�
For optimum purification performance, please close
the doors and windows when operating the air purifier�
• There are indoor pollution resources� For instances,
smoking, cooking, incense�
• Filter reaches the end of life� Replace the filter with a
new one�
EN 9