Troubleshooting - Klarstein 10007538 Handbuch

Lichtdusche

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

The light tubes contain a small amount of mercury sealed within the glass tubing, when a tube

breaks in your home, some of this mercury is released as mercury vapor. To minimize exposure to

mercury vapor, we recommend that users follow the cleanup and disposal steps as follows:

Before Cleanup:

Have people and pets leave the room and air out the room for 5-10 minutes by opening a window or door to

the outdoor environment. Shut off the central forced air heating/ air-conditioning system, if you have one.

Collect material needed to clean up broken tube, just like: stiff paper or cardboard, sticky tape, damp paper

towels or disposable wet wipes.

During Cleanup:

Vacuuming is not recommended unless broken glass remains after all other cleanup steps have been taken.

Vacuuming could spread mercury-containing powder or mercury vapor. Be thorough in collecting broken glass

and visible powder. Place cleanup materials in a sealable container.

After Cleanup:

Promptly place all bulb debris and cleanup materials outdoors in a trash container or protected area until materials

can be disposed of properly. Avoid leaving any bulb fragments or cleanup materials indoors. If practical, continue to

air out the room where the bulb was broken and leave the heating/air conditioning system shut off for several hours.

When the appliance is not being used, it should be stored in a dry location out of reach of children. Do not keep

the it connected to a power source. The unit is designed to be stored in the following environmental conditions:

• Ambient temperature from 5-50 °C.

• Relative humidity of max. 90%.

Trouble

No light.

This chapter lists the questions most frequently asked about the appliance. If you cannot find the answer to

your question, please contact customer service or the dealer for assistance.

Cleaning Up a Broken Tube

Storage