Safety Precautions - Klarstein 10004236 Benutzerhandbuch

1.Safety precautions

Important: Do not expose this product to rain or moisture to preserve
the life of your product.
Caution: Do not disassemble this unit. To prevent the risk of electric
shock, do not remove cover.
Ventilation: The device should be situated so that its location or position
does not interfere with its proper ventilation.
For example, the unit should not be situated on a bed, sofa,
rug or similar surface that may block the ventilation openings.
Heat: The device should be situated away from sources of high
heat such as radiators or stoves.
Cleaning: We strongly suggest using a clean, dry, non-alcohol cotton
swab to clean the glass surface periodically to produce a
clear image.
Non use period: The USB cord for the device should be unplugged from
the computer when the unit is left unused for a long period
of time.
USB overloading: Do not overload the USB connections on your
computer. If you have too many devices connected to your
computer such as a wireless mouse, media player, mobile
phone or other USB powered devices. There may not be
enough power for the film & photo scanner to operate
properly.
Servicing: The user should not attempt to service the device beyond
those means described in the operating instructions. All
other servicing should be referred to qualified person.
Film Holder: The design of the film holder is follows ISO standard. In some
cases the holes on the film will not match exactly to the
alignment of the holder. This is caused by using a
non-standardized film. In this case there will be a small black
line on the edge of the frame that can easily be cropped out
using photo editing software.
ISO-- International Organization for Standardization
For environmental protection and energy conservation, besides in
PLAYBACK and USB mode, the device will be powered off
automatically without any operation in 30 minutes of inactivity.
1