Before Using For The First Time; Care And Daily Cleaning - Bosch CleverMixx MQWPL2000 Gebrauchsanleitung

en

Before using for the first time

With the universal cutter, you can use the
appliance at full power. If the universal
cutter is not included with the hand blender,
it can be ordered from customer service
(order no. 12011748).
Before using for the first
time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging.
■ Remove the packaging material that is
present.
■ Check all parts for completeness.
X Fig. A
■ Inspect all parts for visible damage.
■ Thoroughly clean and dry all parts
before using for the first time.
X "Care and daily cleaning" see
page 10
Tools
Notes:
■ The stirring whisks are not suitable for
processing heavy dough.
■ The maximum processing quantity is
500 g of flour and ingredients.
Turbo stirring whisks
Suitable for sauces, beaten egg whites,
mashed potatoes, crème fraîche,
mayonnaise, cream and light dough, e.g.
cake mixture.
Operation
W Risk of injury!
Do not insert the mains plug until all
preparations for working with the appliance
are complete and the tools are firmly
connected to the base unit. Never reach
into the rotating tools. Only use tools of the
same type in pairs.
10
X Fig. B
1. Completely unwind the mains cable.
2. Slide the tools into the relevant openings
until you hear them lock into place.
3. Place the ingredients into a suitable
receptacle.
4. Plug into the mains.
5. Immerse the stirring whisks. Hold the
bowl firmly with one hand.
6. Switch on at the required speed level:
Level 1: For working and mixing
ingredients in
Level 4: For beating
M: For temporary maximum output,
press to the left and hold.
7. Move the mixer to and fro in the bowl
while mixing.
8. As soon as the desired consistency is
achieved, set the switch to 0 and wait for
the appliance to come to a stop. Only then
should you remove the tool from the food.
9. Unplug the mains plug.
10. Press the ejector button and remove the
tools.
Note: The ejector button can only be
actuated if the switch is in the 0 position.

Care and daily cleaning

The appliance and the tools used must be
thoroughly cleaned after each use.
W Risk of electric shock!
– Unplug the appliance before cleaning it.
– Never immerse the base unit in liquids
and do not clean in the dishwasher.
– Do not steam-clean the appliance.
Caution!
– Do not use any cleaning agents
containing alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
■ Wipe the outside of the base unit with a
soft, damp cloth and dry off.
■ Clean the tools with dishwashing
detergent and a soft brush or place
them into the dishwasher.
■ Allow all parts to dry.