Troubleshooting - AEG GourmetPRO Series SB9300 Anleitung

Troubleshooting

Troubleshooting
GB
Symptom
The blender does not
switch on.
24
SB9300_Premium_Blender_AEG.indd 24
Cause
Jug/base are not fixed properly.
The Power button is not pressed.
The motor has overheated. The display is
blinking.
The plug is not properly connected to the
power outlet.
Power outage.
Functional problem.
Solution
Check if all the components are in correct
position.
Note! the jug can only be placed on the base
with handle towards the user interface.
Make sure the Power button is illuminated.
If not, press the Power button to turn the
blender on.
Wait until the product has cooled down and
all the buttons are lit.
Check the connection of the plug to the out-
let or try another outlet.
Wait until power outage is over.
Contact authorized service.
2016-02-24 09:11:40