Klarstein 10031981 Bedienungsanleitung Seite 21

ECO function
Press both setting button (16) and (14) for 3s ( or press button "8" on remote control), EGO function runs. In
this mode, display shows only some indicators ( depending on what settings have been done before EGO)
Methods to lock EGO function)
Asleep
In 10s, if no button is pressed when unit is heating, it enters to asleep mode and only shows area temperature.
Open window funtion
When area temperature decreases 3° C or more in 2mins,heater activates open window detection and dis-
plays indicator with a Buzz sound, then stops heating. .
Day/Week timer shifting
Press button „W/24H" do shift between day timer & week timer settings. In week timer mode, indicator
"WeekTimer" is on; in week timer mode, indicator "Day Timer" is on.
Day timer: Display shows indicator "DayTime, " in this mode. First for Hour, press (16) on remote controller,
(14) and (15) buttons for concise one. Then for Minute, press (16) again and (14) and (15) buttons for concise
one, press button (16) and save them.
Week timer: Week timer mode enables "4" periods a day, and "7" days a week. Display shows indicator
"Week Timer" in this mode; press (16) on remote controller for a day first (indicator (6) flashes), by (14) and
(15) ; then the 1st period: press button (16) for a start time, same through (14) or (15). Then press button (16)
for a stop time and again through buttons of (14) or (15) . After setting the first period, then second period
third period...4th period etc.
When all needed setting is completed, press OK button and save them.
Turn off
Press the turn off switch. The heater stops working. Turn off power supply, heater is powered off.
21