Ec Declaration Of Conformity - Makita 4131 Betriebsanleitung

ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use
of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
• Rip fence (Guide rule)
• Safety goggle
• Recommended Carbide-tipped saw blades & workpiece ranges
Diameter &
number of Application
teeth
185/38 Mild steel
Thin mild
185/48
steel
Corrugated
185/70
steel sheets
CAUTION:
• Always use carbide-tipped saw blades appropriate for your job. Do not cut aluminum, wood, plastics, concrete, tiles,
etc.
• Carbide-tipped saw blades for metal cutting saw are not to be resharpened.
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level:
sound power level:
– Wear ear protection. –
The typical weighted root mean square acceleration value is
2
.
not more than 2.5 m/s
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards or standard-
ized documents,
HD400, EN50144, EN55014, EN61000,
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Yasuhiko Kanzaki CE2003
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Angle Metal pipes
4 mm or
2 – 5 mm
more
3 – 6 mm 1.2 – 5 mm
N/A 1.2 – 2 mm
98 dB (A)
111 dB (A)
Director
Applicable workpiece & thickness range
Channels
4 mm or
more
2 mm or
more
N/A
ENG005-1
ENH001-1
Sheet metal Metal studs
2 – 7 mm N/A
2 – 7 mm 2 – 4 mm
Thinner than Thinner than
4 mm 2 mm
(N/A...Not applicable)
Corrugated
steel sheets
N/A
N/A
Thinner than
2 mm
9