Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Inserting the Batteries
1. Unscrew the battery compartment lid with a suitable
cross slot screwdriver and insert the three new
batteries of the type 1.5 V, LR6 (AA) into the compart-
ment. Please observe the correct polarity.
2. Re-tighten the battery compartment lid.
Using
1. Place the TV simulator on a level, stable surface so
that it cannot fall down. Protect valuable furniture
surfaces from dents or scratch marks using a suitable
underlay.
2. The mounting location should be a place that is not
directly visible from outside. Otherwise, you will notice
that this is not a real television set.
3. Switch on the TV simulator by sliding the switch to the
position ON. The simulator turns on in the dark after
approx. 5 seconds and stays permanently on. To
switch off the unit slide the switch to the position OFF.
Hint: If it is too bright in the room, cover the unit for
approx. 5 seconds in order to switch it on.
4. Check the light effects of the activated TV simulator
from outside of your apartment, and if required, choose
a different mounting location.
The TV simulator will be on for approx. 5 hours. Thereafter
it will switch off automatically.
Operation
8
Werbung
Inhaltsverzeichnis
