Network Settings By Using Wireless Connection - Grundig GBP 7000 3D Bedienungsanleitung

INITIAL SETUP
10
Select »Secondary DNS« by using »A« or
»S« and press »ENTER«.
Enter the Secondary DNS by using the
number buttons.
Select »Ok« by using »S« and press
»ENTER« to confirm,
or select »Cancel« by using »s« and press
»ENTER« to cancel the setting.
11
Select »Apply« by using »S« and press
»ENTER« to confirm the setting;
or
select »Cancel« by using »s« and press
»ENTER« to cancel the setting.
12 If the connection is successful, »Network Test«
appears.
End setting by using »ENTER«.
Network settings by using
wireless connection
The device must be connected to a wireless
router with the WLAN Antenna.
Please see chapter "CONNECTION AND PREP-
ARATION".
Note:
The red led of the »WLAN Antenna« blinks
7
when the antenna is active and the blue led
blinks when the wireless connection is active.
1
Press »SETUP« to open the main menu.
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to confirm.
3 Select »Network« by using »A« or »S«
and press »ENTER« to confirm.
16
ENGLISH
----------------------------------------------------------------------------------------------------------------------
4
5
6
7
Select »Network List« by using »A« or »S«
and press »ENTER« to confirm.
– Display: The list of available wireless net-
works appears.
Select the wireless network you like by using
»A« or »S« and press »ENTER« to confirm.
Note:
If the network is encrypted, the wireless
7
network password (security code WEP or
WPA) screen appears.
Press »ENTER«, the keyboard appears.
Select the first character of the password
(capital and small letters, numbers, symbols)
by pressing »A«, »S«, »a« or »s« and
confirm by pressing »ENTER«. Repeat the pro-
cedure for all characters.
After you finish entering all characters, select
the push button »OK« on the keyboard by
pressing »A«, »S«, »a« or »s« and press
»ENTER« to confirm.
Notes:
You can choose between numbers, lower and
7
upper case letters, and special characters.
If you make a mistake during entry, press
7
»A«, »S«, »a« or »s« to select the
push button » « and press »ENTER« to
confirm. The last character is deleted.
Select »Connect« to connect to the wireless
network by using »A« or »S«,
or select »Delete« by using »a« or »s« to de-
lete the wireless network from the list;
or select »Cancel« by using »a« or »s« to
cancel the setting;
or select »Disconnect« by using »a« or »s«
to disconnect from the wireless network;
and press »ENTER« to confirm.