English - Philips Cucina HR2305 Bedienungsanleitung

ENGLISH

6
General description
A
Motor unit
B
Mains cord
C
On/off button for soft ice cream
D
On/off button for compact ice cream
E
Filling opening
F
Release button for removing the motor unit from the cover
G
Transparent cover
H
Clamps to fix the cover with motor unit to the bowl
I
Stirrer
J
Cooling disc
K
Bowl
L
Handgrips
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
Check if the voltage indicated on the base of the appliance corresponds to the local mains
voltage before you connect the appliance.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
When making ice cream, hygiene is of the utmost importance. Make sure that all parts of the
ice-cream maker are entirely clean, especially the parts that come into contact with the ice-
cream mixture.
Prevent the ingredients from freezing onto the cooling disc to guarantee proper functioning
of the stirrer.
- Only put ingredients in the bowl while the stirrer is rotating.
- Do not switch the appliance off until the ice cream is ready.
Never insert an object, e.g. a spoon, into the bowl while the appliance is operating.
Never exceed the quantities indicated in the recipes.
Keep the appliance out of the reach of children.
Safety shut-off function
The ice-cream maker is equipped with a safety shut-off function. After 120 minutes of operation and
also if overloading occurs, the motor is switched off automatically.
Preparing for use
Freezing the cooling disc
Make sure the cooling disc is properly frozen when you put it in the ice-cream maker.
1 Make sure that the cooling disc is clean and dry.
2 Put the cooling disc in the freezer or in the freezer compartment of a fridge to cool it to the
required temperature of -18cC/cF or colder.
It will take 18 to 24 hours to freeze the cooling disc.
Do not place other objects on top of or against the cooling disc while it is being frozen.
Store the cooling disc with the bottom pointing downwards in a well-closed plastic bag in the
freezer to prevent ice from forming on the cooling disc. In this way the disc will always be
ready for use.
3 Remove the cooling disc from the freezer after you have prepared the ingredients for the ice
cream.