After-Sales Service And Application Service - Bosch GlassVAC Solo Plus Originalbetriebsanleitung

Troubleshooting
Problem Possible Cause
Machine will not switch Battery discharged
on
Battery too hot/cold
Restricted or no va- Suction head blocked
cuum
Drain plug removed
Machine switches off Battery too hot/cold
Suction head blocked
Water leaks from ma- Spray applicator not mounted correctly
chine
Battery will not charge Charger not connected correctly
Battery too hot/cold
Charging takes longer Charger < 1 amp
than 130 min
Streaking on windows Wiper blade damaged
Too much force applied
Too little force applied
Maintenance and Cleaning (see
figure K)
Always clean the product thoroughly after use.
Remove the suction head from the main body and rinse.
Whilst suction head (2) is removed from the machine, fill the
dirty water tank (7) via the suction head aperture to the max
line with clean, warm water. DO NOT fill the dirty water tank
(7) via the drain hole. Shake the machine and pour the water
out via the drain plug(8).
Maintenance of the suction head
Protect the suction head against damage during storage.
Prevent the wiper blade from touching paper or cardboard,
as this could damage the wiper blades polymer coating.
Spots or lines may be visible on the polymer coating. This is
normal and does not affect the cleaning performance.
Textiles
Microfiber cloths: 67% polyester, 14% polyamide, 19%
polypropylene
After-sales Service and Application
Service
www.bosch-pt.de
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
Bosch Power Tools
Corrective Action
Recharge battery
Allow to cool/warm
Unblock suction head
Replace drain plug
Allow to cool/warm
Unblock suction head
Mount the spray applicator correctly
Check charger and USB cable connections
Allow to cool/warm
Use battery charger > 1 amp
Replace wiper blade (accessory)
Apply reduced force
Apply more force
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or ar-
range the collection of a product in need of servicing or re-
pair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
English | 11
F 016 L81 880 | (16.10.2018)