Herunterladen Diese Seite drucken

Safety Instructions; Description Of Parts - Klarstein 10026417 Kurzanleitung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

When using electrical appliances, basic safety precautions should always be followed.
Check that the voltage indicated on the rating plate corresponds with that of the local network
before connecting the appliance to the mains power supply.
This appliance is not intended for use by persons (including children) who are not mentally able,
physically capable, experienced or do not understand the product. They should be given supervision
and instruction in the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by a qualified engineer.
The appliance is not intended to be operated by means of an external timer or separate remote-
control system.
• Ensure there is sufficient ventilation around the appliance to allow the escape of heat and steam.
Do not immerse the appliance in water or any other liquids.
This appliance contains no user-serviceable parts. All repairs should only be carried out by a
qualified engineer. Improper repairs may place the user at risk of harm.
Do not operate the appliance after a malfunction or if it has been dropped or damaged in any way.
The appliance must be unplugged from the power supply after use and whilst any maintenance
such as cleaning is carried out.
The appliance must be used on a stable, heat resistant surface.
Do not use the appliance for any purpose other than that for which it is designed.
• Ensure that the supply cord is kept away from heat or sharp edges that could cause damage.
This appliance is intended for domestic use only. It should not be used for commercial purposes.
Lid
Bowl frame
Bowl holder
Water refilling hole
Before initial use, wash the bowl frames & holders and lids in warm water using a mild detergent.
Rinse and dry thoroughly using a tea towel.
• Assemble the bowl frames with holders, ensure it is fitted correctly.
• Remove the water container covers and fill with water to the MAX mark. The two containers are
linked so that the water level in each is the same. Refit the covers.
Tip: Ensure there is sufficient water to avoid having to interrupt cooking.
Tip: Water can be added through the water refilling hole on the central of top panel.

Safety Instructions

Description of Parts

Instructions for Use
6

Werbung

loading