Intended Use; Unpacking The Tool; Before Use; Inserting And Removing The Battery - Westfalia 90 05 95 Originalanleitung

Intended Use

 The mixer has been designed for private use only. It has not been
designed for operation in industry. With the supplied mixing paddle
the electric mixer is suitable for mixing low-viscosity emulsions and
viscous materials, for example: paints, lacquer, adhesives, mortar,
etc.

Unpacking the Tool

 Carefully unpack and inspect your mixer. Familiarise yourself with all
its features and functions.
 Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool.

Before Use

Please note that that battery and charger are not included with the tool!

Inserting and Removing the Battery

1. To fit a charged battery, slide it on to the hand grip of the mixer until
it clicks and locks into position.
2. To remove the battery (5) from the tool, press the battery release
button, then slide the battery off the hand grip.
WARNING: Do not try to remove the battery without pressing the
battery release button. The mixer or battery could be damaged.
Note: Make sure the battery and mixer are lined up correctly. If the
battery does not slide into the tool easily, do not force it. Instead, slide
the battery out of the tool again, check the top of battery and the
Mixer's battery slot are clean and undamaged and that the contacts are
not bent.
Setting up the Battery Charger – (Battery and Charger not included)
1. If fitted, remove the battery from the battery charger.
2. Insert the battery charger mains plug into a suitable mains socket.
Note: One LED on the charger will indicate ready status. For further
information please refer to the included manual of the included charger.
Operation
20