Maintenance And Care; Troubleshooting; Technical Specifications - Kärcher FP 306 Bedienungsanleitung

Maintenance and care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorised customer service.
Cleaning the appliance and
accessories
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Cleaning the polishing pads
 Remove and tap the polishing pads af-
ter every use. Wash and dry as needed.
Note: Can be washed at 60 °C; please
do not use any soft detergents, do not
dry in dryer.
 Place dry polishing pads into the stor-
age compartment.
Replacing the filter bag
Change the filter bag at regular intervals.
 See Chapter "Inserting a filter bag".
Replacing polishing pads
Check the state of the polishing pads at
regular intervals; replace them if they are
worn out.
 See Chapter "Insert the polishing
pads".

Troubleshooting

Discs running unevenly / rattling
 This sound is caused by the system.
The appliance was not stored with the
transport lock activated. This sound will
disappear on its own after a while dur-
ing polishing.

Technical specifications

Voltage
Current type
Protective class
Connected load
Rotating speed, polish-
ing discs
Weight
Dimensions
Volume, filter bag
Subject to technical modifications!
– 7
EN
sound
230
1~50/
60
II
600
1000
7
385 x
340 x
1155
4
V
Hz
W
rpm
kg
mm
l
13