Operation - Westfalia FH-801 Bedienungsanleitung

This appliance is not suitable for use in a bathroom.

Operation

Summer service (ventilation only): turn the switch to setting
-
- Heating at reduced power: turn the switch to setting I (1000W).
- Heating at full power: turn the switch to setting II (2000W).
- Switching off: turn the switch to setting O.
Regulating the Thermostat
Turn the thermostat knob (right) in a clockwise direction until it reaches the
maximum setting to heat up the room. When the room has reached the
desired temperature turn the thermostat knob in an anti-clockwise direction up
to the point where the appliance switches off and not beyond. The temperature
fixed in this way will be automatically regulated and kept at a constant level by
the thermostat.
Cleaning and Maintenance
Before cleaning always remove the plug from the electrical socket.
Clean the air inlet / outlet grilles frequently.
Never use abrasive powders, liquids or solvents.
Use a damp cloth at the utmost.
Safety device
The heater is fitted with a safety device which will switch off the heater in case
of accidental overheating (e.g. obstruction of air intake and outlet grilles, motor
turning slowly or not at all). To reset, disconnect the plug from the power for a
few minutes, remove the cause of overheating then plug the appliance in
again.
Operation
4
.