Led Messages; Error Messages - Yamaha CD8-mLAN Bedienungsanleitung

LED Messages

LED messages
Indicates if sound from sources other
mLAN1, 2 than the device being disconnected is
interrupted.
RT/ERR Indicates root and error.
ACTIVE Indicates the status of the relay function. Blue ... The relay function is enabled.

Error messages

LED
2 1 RT
red orange
red orange
red red orange
green orange The number of hops exceeds 16.
green orange The power to the bus is insufficient.
red red
red red
red
Function
Cause
The topology of the connected devices
creates a loop.
Cycle Start Packet is not transmitted to
the bus. (Audio/MIDI data cannot be
transmitted.)
A malfunctioning device exists on the
bus.
MIDI IN transfer rate is not correct.
Data transmission exceeds the MIDI
transfer rate.
The sound is interrupted for some rea-
son, or the devices are not syncing.
Status
Red ... Sound is interrupted.
Green ... Sound is not interrupted.
(leaf node)
Red/orange ... An error has occurred.
Green ...
The CD8-mLAN is a "root."
Action
Check to see if any part of the connection
creates a loop.
Remove the malfunctioning device.
Remove the malfunctioning device.
Check the number of hops.
Add a power provider to the bus, or
remove a power consumer from the
bus.
Check the MIDI transfer rate setting.
Check to see if the transmitting device
is operating properly.
Check the word clock setting on the
CD8-mLAN and the source.
11