Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Troubleshooting - Velleman CAMSET18 Bedienungsanleitung

S/w video-türsprechanlage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
4. Wiring and Installation
a. Wiring
Connect the monitor handset and the outdoor camera system as
illustrated. Terminals no 4 and 5 run to the electric door lock.
Terminal no 5 is the monitor handset power supply connection
(13.5VDC).
b. Installing the Monitor Handset
Choose an appropriate installation spot. Mount the monitor
handset on a non inflammable spot away from chemicals,
excessive humidity, direct sunlight and other sources of heat,
and magnetic fields such as television sets and speakers.
Ensure the mounting surface is flat. Mount the plate at a height
of ± 1.5m. Use the bracket as a template to mark the holes
location. Drill the holes using a power drill and the appropriate
bit. Insert a nylon plug in each of the holes. Fix the plate onto
the wall using the appropriate screws. Fix the monitor handset
to the plate.
c. Installing the Camera System
Ensure the installation spot is
sheltered and as much protected form
wind, rain and snow as possible.
Mount the plate at a height of ± 1.5m.
Use the bracket as a template to mark
the holes location. Drill the holes
using a power drill and the
appropriate bit. Insert a nylon plug in
each of the holes. Fix the plate onto the wall using the appropriate
screws. Fix the bracket and the camera system to the plate.

5. Operation

• As soon as a visitor presses the doorbell, the videophone will chime and display the image picked up from the
intercom unit. The image will be displayed for 30 seconds if the receiver is not picked up. When picking up the
receiver, the image will be displayed for 2 minutes.
• The door can be opened by pressing the unlocking button provided that an optional door latch has been
installed (drive voltage of 12V, lock resistor of 15 min.).
• Press the monitor button to display the image picked up from the intercom unit at any time.
• Hold the panic button pressed to activate the alarm on the camera system. Release the button to deactivate
the alarm.
• Adjust the brightness, the contrast and the volume if necessary.

6. Troubleshooting

Unclear monitor picture
Sunlight is hitting the monitor. Try shadowing the monitor with your hand.
CAMSET18
- 4 -
VELLEMAN

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis