Reset Function - Velleman RCQC3 Bedienungsanleitung

RCQC3

Reset Function

Switch on your quadcopter. Wait for the Push and hold the throttle stick completely
orientation LEDs to blink slowly. downwards.
Place the quadcopter on a flat surface. Push
the throttle and cyclic sticks to the bottom-
right corner until the LEDs blink rapidly.
Switch on your remote control. The LEDs
Release the sticks. Resetting has been
should burn steadily.
completed when the LEDs burn steadily. Re-
synchronize the remote control and
quadcopter as described above.
V. 01 – 11/07/2016 10 ©Velleman nv