Noise/Vibration Information - Bosch GCM 12 JL Professional Originalbetriebsanleitung

30 | English
Technical Data
Mitre Saw
Article number
Rated power input
No-load speed
Reduced starting current
Laser type
Laser class
Weight according to EPTA-Procedure 01:2014
Protection class
Permissible workpiece dimensions (maximum/minimum) see page 34.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Mounting hole diameter
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards:
EN 61029-1, EN 61029-2-9, EN 60825-1.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 10.06.2015

Noise/Vibration Information

Sound emission values determined according to
EN 61029-2-9.
Typically the A-weighted noise levels of the product are:
Sound pressure level 98 dB(A); Sound power level
111 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 61029-2-9: a
2
K=1.5 m/s .
1 609 92A 1CJ | (10.6.15)
mm
mm 1.7–2.6
mm
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
2
<2.5 m/s ,
h
3 601 M21 100
3 601 M21 130
3 601 M21 170
W 2000
-1
min 4300
nm 650
mW < 0.39
kg 20.2
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
305
given in EN 61029 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
30
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Assembly
 Avoid unintentional starting of the machine. During as-
sembly and for all work on the machine, the power plug
must not be connected to the mains supply.
Delivery Scope
Carefully remove all parts included in the delivery from their
packaging.
Remove all packaging material from the machine and the ac-
cessories provided.
Before starting the operation of the machine for the first time,
check if all parts listed below have been supplied:
– Mitre saw with mounted saw blade
– Dust bag 1
– Extraction adapter 2
– Material clamp 40
– Hex key 17
– Tilt-protector bar 44 with fastening set 47 (2 hex socket
screws, 2 washers)
3 601 M21 160
1500
4300
 
650
< 0.39
1M 1M
20.4
/II /II
GCM 12 JL
3 601 M21 190
3 601 M21 1P0
1800
4300

650
< 0.39
1M
20.2
/II
Bosch Power Tools