Installing The Batteries - JVC KV-M700 Bedienungsanleitung

Before using the remote controller:
• Aim the remote controller directly at
the remote sensor on the color
monitor. Make sure there is no
obstacle in between.
• Do not expose the remote sensor to
strong light (direct sunlight or artificial
lighting).

Installing the batteries

When the controllable range or effectiveness of the remote controller decreases, replace the
batteries.
8
1. Remove the back cover.
While pushing on the back cover, slide it in the direction
of the arrow.
2. Install the batteries.
Place the two batteries R03(UM-4)/AAA(24F) supplied
in the remote control as illustrated.
3. Close the back cover.
Slide the back cover in the direction of the arrow until a
click is heard.
Remote sensor