Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications - Velleman CTC1000SO Bedienungsanleitung

Außenalarm für ctc1000
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
Water: siren will be on for 0.5s & off 0.5s continuously.
Alarm modes: LED and beep behaviour
In order to easily recognize various statuses, the bell box uses the following methods to indicate while
you are in arm and disarm modes.
For the sounds folllowed by *, the beep confirmation depends on the Confirmation ON / OFF settings you
are using. When Confirmation is set to OFF, the device will not beep.
alarm mode
arm
disarm
arm (low battery)
disarm (low battery)
arm (tamper)
disarm (tamper)
11.

Technical Specifications

power supply
sound level
frequency
range
operating temperature
humidity
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 12/06/2013
CTC1000SO
Sound
1 beep *
2 beeps *
5 beeps
5 beeps
5 beeps
2 beeps *
4 x alkaline 1.5 V type D batteries (not incl.) (LR20)
104 dB @ 1 m
868.6375 MHz
> 200 m in open space (ideal circumstances)
-20 to 50 °C
up to 95 % non-condensing
257 x 220 x 69 mm
787 g
8
LED
3 LEDs flash together
LEDs flash sequentially for 1 cycle
3 LEDs flash three times
LEDs flash sequentially for 2 cycle
3 LEDs flash three times
3 LEDs flash twice
©Velleman nv

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis