Aerial Connection - Hitachi CL32W30TAN Wartungshandbuch

It is recommended that the RF (aerial) leads which connects external equipment to your TV -
and the actual aerial lead itself - should be of the highest quality. This will reduce interferance
and produce better picture quality and recordings. You can consult your dealer on this matter.

aerial connection

Connect aerial (RF) lead to digital 'in'
1
aerial and VCR connection
Note: The digital 'link lead' is
the piece of equipment with
two 'blocks' near the end.
IMPORTANT NOTE: When you connect your VCR to your television, the Audio Visual setting
has to be set correctly to ensure best picture quality -
Connect aerial (RF) lead to digital 'in'
1
3
Connect VCR 'out' to your television's RF socket 'in' marked
4
Scart leads are an optional extra
6
1
marked
RF OUT
1
2
marked
RF OUT
SERIAL PORT
C.1
C.2
2
Note: The digital 'link lead' is the piece of
equipment with two 'blocks' near the end.
Connect aerial (RF) 'link lead' to
2
TV analogue 'in' marked
SERIAL PORT
C.1
LINE
C.2
AV2 AV1
3
see AV Setup section on page 32
2
*
S C R
LINE
R L
AUDIO LINE OUT
AV2 AV1
2 X 12W 8
S C R L
R L
AUDIO LINE OUT
4
Video Cassette Recorder
Connect aerial (RF) 'link lead' to
VCR RF 'in'.
2 X 12W 8
L