Application Tips; Maintenance And Servicing; Maintenance And Cleaning - Bosch Gluey Originalbetriebsanleitung

Application tips

Note: If a new glue stick is inserted, it will push the rest of
the previous glue stick out before the new colour or material
comes out. Please take note of this fact when changing the
colour or material of the glue stick.
Remove adhesive residue with a blunt object after it has
cooled. If necessary, the bonding locations can be unstuck
again by applying heat.
Adhesive residue on clothing cannot be removed.
The bonding locations can be painted.
Errors – causes and corrective measures

Maintenance and servicing

Maintenance and cleaning

After the adhesive has hardened, you can remove it with a
blunt object. Do not use solvents when cleaning.
Take particular care to keep the slider (5) and its guide
clean.
Do not remove an inserted glue stick (3) out of the back of
the glue pen.
1 609 92A 3XZ | (9.3.18)
Gluey_innen_160992A3XZ_001.indd 16 Gluey_innen_160992A3XZ_001.indd 16
16 | English
Material/workpiece
Long workpieces with large
surface areas
Flexible materials
(e.g. textiles)
Do not use flammable solvents to clean the bonding
locations. The hot glue could ignite any solvent residue or
release hazardous fumes.
Problem Cause
Glue stick feed Glue pen has not
is sluggish. finished heating
up.
Feed is too fast
Batteries are weak Charge batteries
Melting point of
glue stick is too
high
Adhesive flows Glue stick diameter
backwards in too small.
the glue pen.
"Threads"
Feed is still activat-
ed when the appli-
develop as the
cation of adhesive
glue pen is re-
is finished.
moved from
the bonding
Discharge nozzle
location after
has not been wiped
applying adhe-
off.
sive.
Warning! Switch the glue pen off before commencing
maintenance and cleaning work.
Keep the glue pen clean to ensure good, safe opera-
tion.
Recommendation
Apply adhesive in dots
Apply adhesive in lines
Corrective measure
Let the nozzle heat up
for 60 s.
Use recommended
original glue sticks.
Use recommended
original glue sticks.
Stop the feed just be-
fore finishing applying
adhesive.
After finishing apply-
ing adhesive wipe off
the nozzle on the
workpiece.
Bosch Power Tools
09.03.2018 12:52:22 09.03.2018 12:52:22