Inhaltsverzeichnis
Werbung
Information
The car amperemeter is an easy-to-use instrument for
measuring electrical circuits in the 12 V net of vehicles.
The load of individual circuits can be determined quickly
and accurately. It is also possible to detect leakages,
which drain the car battery, with the car amperemeter
connected to the car fuse boxes. Currents up to 20 A
can be measured with the test plug used in the fuse
holder.
Inserting / Replacing the Battery
1. Switch off the device.
2. Use a small Phillips screwdriver to unscrew the screw
located at the battery compartment (6) in counter
clockwise direction.
3. Remove the battery compartment lid.
4. Insert a new battery of the type CR2032 into the bat-
tery compartment. Pay attention to the proper polarity.
The plus pole is facing away from the device.
5. Use the lid and the screw to close the battery com-
partment.
Using the LED Light
Press and hold the LED key (2) to switch on the white
LED. By doing this you even can find the right fuse on
locations in your car that are poorly lit.
If the LED light shines weakly or if it does not shine at all,
please replace the battery of the device.
Using
9
Werbung
Inhaltsverzeichnis
