Philips HD6161 Bedienungsanleitung Seite 10

EnglisH
10
1 Heat the oil or fat to a temperature of 160°C.
 Put two thin slices of bread or a few sprigs of parsley in the oil.
 Wait until no more bubbles appear and then scoop the bread or the parsley out of the fryer
with a spatula.
The oil or fat now has a neutral taste again.
Home-made French fries
You make the tastiest and crispiest French fries in the following way:
1 Use firm potatoes and cut them into sticks. Rinse the sticks with cold water.
This prevents them from sticking to each other during frying.
Note: Dry the sticks thoroughly.
 Fry the French fries twice: the first time for 4-6 minutes at a temperature of 160°C, the
second time for 3-4 minutes at a temperature of 170°C.
Let the French fries cool down before you fry them for the second time.
 Put the home-made French fries in a bowl and shake them.
cleaning
Let the oil or fat cool down for at least 4 hours before you clean or move the fryer.
Never immerse the control panel with the heating element in water nor rinse it under the tap. If
necessary, clean this part with a moist cloth.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
1 Remove the lid. (Fig. 3)
 Remove the basket from the fryer.
 Remove the control panel with the heating element from the fryer and put it in a safe, dry
place. (Fig. 13)
 Remove the water tray from the fryer and empty it.
5 Lift the inner bowl out of the appliance and pour out the oil or fat (Fig. 14).
6 Clean the housing, the inner bowl, the lid, the water tray and the frying basket in the
dishwasher or in hot water with some washing-up liquid. Rinse them with fresh water and
dry them properly.
Make sure that all parts are dry before you fill the fryer with oil or fat.
storage
Let the oil or fat cool down for at least 4 hours before you store the fryer.
1 Put all parts back into the fryer housing in the following order: inner bowl, control panel with
heating element, water tray, frying basket and lid.
 Push the cord into the cord storage compartment. (Fig. 15)
 Lift the fryer by its handles and store it (Fig. 16).