Safety Notes; Functional Description; Intended Use - Bosch S 500 A Professional Originalbetriebsanleitung

12 | English

Safety Notes

en
Read all safety warnings and in-
WARNING
structions that were provided
with the drill stand or the drill. Failure to follow
the safety warnings and the instructions may re-
sult in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for
future reference.
Disconnect the plug from the power source
before making any adjustments or changing
accessories. Starting drills accidentally is
the cause of some accidents.
Assemble the drill stand properly before
mounting the drill. The correct assembly is
important in order to ensure proper function.
Before using, fasten the drill securely to the
drill stand. An unsecured drill in the drill
stand can lead to loss of control.
Fasten the drill stand on a firm and level
surface. When the drill stand can slip away
or wobble, then the drill cannot be guided
uniformly and securely.
Do not overload the drill stand and do not
use it as a ladder or scaffold. Overloading or
standing on the drill stand can raise the drill
stand's centre of gravity and cause it to tip
over.
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
Avoid abnormal body posture. Provide for a
secure stance and keep your balance at all
times. In this manner, you can control the
power tool better in unexpected situations.
Maintain the drill stand with care. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the function of the drill
stand. Have damaged parts repaired before
using the drill stand. Many accidents are
caused by poorly maintained devices.
1 609 929 W61 | (9.6.10)
Store idle drill stands out of the reach of
children and do not allow persons unfamil-
iar with the device or these instructions to
operate the device. Drill stands are danger-
ous in the hands of untrained users.
Have your drill stand serviced/repaired on-
ly by a qualified repair person using original
replacement parts. This will ensure that the
safety of the device is maintained.
Hold the drill stand by the insulated grip-
ping surfaces when performing operations
where the application tool could contact
hidden wiring or its own power cord. Con-
tact with a "live" wire will also make exposed
metal parts of the drill stand "live" and shock
the operator.
The safety and operating instructions for
the drill and the accessories being used are
strictly to be observed!
Before any work on the drill stand or the
drill, during work breaks as well as when
not using for extending periods, secure the
drill stand against unintentional moving by
engaging the feed lock 3.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the fold-out page with the illustration of the drill
stand and leave it open.

Intended Use

The drill stand for diamond drills is intended for
mounting Bosch diamond drills. Other machines
may not be mounted.
The drill stand for diamond drills can be fas-
tened to a wall or floor with anchor and quick-
clamping spindle. In combination with the dia-
mond drills GDB 1600 WE or GDB 1600 DE, the
drill stand can also be fastened overhead.
Bosch Power Tools