AEG CTV 2202 Bedienungsanleitung Seite 47

If you have any questions, please consult the troubleshooting guide below:
NO PICTURE OR SOUND
Ensure the power button is on.
Ensure the power outlet is operational.
Ensure the power cord is not damaged.
Ensure the power plug is connected
firmly to the outlet.
PICTURE BUT NO SOUND
Ensure the audio is not set to mute.
Ensure you have set the player s AUDIO
settings correctly.
POOR PICTURE OR SOUND
Ensure you have set the players AUDIO
settings correctly
Ensure the disc is not scratched or
stained.
BAD DISC DISPLAYED
Ensure the disc is not warped,
damaged or deformed.
Ensure the disc is not badly stained or
damaged.
Ensure the disc format is compatible
with the player.
Please check whether you have tried to
play a software CD. If so, please restart
the player.
Pixel mistakes
Pixel mistakes are no lack of TFT panels. Pixel mistakes can not be completely avoided during
production procedure. The convergence problems for CRT TV's as well as such pixel mistakes for
LCD are defined as a value of tolerance only.
Our build-in TFT panels are provided as the maximum between quality and price.
In case of faulty operation like huge pressure on the panel, pixel mistakes may occur.
Continuous inspections during and after the production are approving our high quality standard of
AEG branded models in order that our products will be within our limit of tolerance.
The numbers of allowed pixel mistakes are depending from the resolution and the size of the
panel as well as from the manner of pixel- or subpixel mistake.
REMOTE NOT WORKING
Make sure the Main units POWER button is
on
Ensure the remote batteries are working.
Point the remote control directly at the
players IR sensor.
Remove any obstacles between the remote
UNIT NOT WORKING
Turn off the power, and then turn it on
again.
NO DISC DISPLAYED
Ensure you have put the disc on the
tray.
Ensure the disc is not upside down.
Ensure the disc is not distorted,
stained or scratched.
19