Setting The Speaker Size; Setting The Speaker Mode - Yamaha DVX-S120 Bedienungsanleitung

Creating the Best Listening Space

Setting the Speaker Size

Setting the Speaker Mode

POWER
/DTS
NIGHT
TV CH
PRESET
h
ON SCREEN
CH
STATUS
TV VOL
DVD/CD
MOVIE
Advice
• Even if "* FRONT" is set to "SMALL", when "* BASS" is set to "FRONT", low tones below 90 Hz of the Front L/R channel
signal will output from the Front Speakers.
• If you select a sound field effect when "* SUR." is set to "NON", CinemaStation enters Virtual Cinema DSP mode.
• Settings made in Speaker mode are not reflected when connected to headphones.
Note
• When a sampling digital signal over 48 kHz is input, some settings may not be reflected in the playback sound.
62
To get the most out of the sound field effects, you need to use all 6 of the
supplied speakers (Front, Center, Surround and Subwoofer). But depending
on your listening objectives, you can turn off specified speakers.
When using any speaker other than YAMAHA Speaker Set NX-P120, you
need to specify the speaker size.
You can specify these settings in Speaker mode.
DVR-S120 WB56650
POWER
TV
AUDIO ANGLE SUBTITLE
SELECT MATRIX 6.1 STEREO
REPEAT A-B
SW CENTER SURR
SHIFT
TV INPUT
A B C D E
SLEEP
PRESET
MENU
SET MENU
SET MENU
CH
ENTER
RETURN
TEST
VOLUME
MUTE
g
AMP
AMP
VIDEO
VCR
TUNER
MUSIC SPORTS GAME
CINEMA
Specify the speaker to produce no sound by setting
"* CENTER", "* SUR." or "* BASS".
When using other speakers, be sure to set the speaker
size, and depending on your listening objectives set the
Front Speaker level.
Press AMP.
Press SET MENU.
"* Speaker Set" appears.
Press w.
Press h or g to select item you want to set.
Press q or w to change the setting.
Repeat steps 4 and 5 to set the needed item.
When exiting the SET MENU, press SET MENU.
Pressing any one of the DSP Program buttons also exits
the SET MENU.