Installing The Appliance; Changing Over The Door Hinges; Note Ambient Temperature And; Ventilation - Bosch KSW series Gebrauchsanleitung

en

Installing the appliance

Install the appliance in a dry, well
ventilated room. The installation location
should neither be exposed to direct
sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use
a suitable insulating plate or observe the
following minimum distances to a heat
source:
3 cm to an electric cooker.
30 cm to an oil or solid fuel cooker.
Changing over the door
hinges
Fig. 2
(if required)
Installation in numerical sequence.
18
Note ambient
temperature and

ventilation

The climatic class can be found on the
rating plate. It specifies the ambient
temperatures at which the appliance may
be operated.
Climatic category Permitted ambient
temperature
+10 °C to 32 °C
SN
+16 °C to 32 °C
N
+18 °C to 38 °C
ST
+18 °C to 43 °C
T
Ventilation
Fig. 3
The air on the rear panel of the appliance
heats up. The warm air must be able to
escape. Otherwise, the refrigerator must
work harder. This will increase the power
consumption.
For this reason pull up the spacers
provided on the appliance's rear panel for
the optimum distance to the wall Fig. 4.
Never cover or block the ventilation
openings!