AEG FT 4919 Bedienungsanleitung Seite 14

English
70
Scan Op- In Scan mode, the current surface tempera-
eration ture is displayed. This does not mean the
body temperature. This is useful for checking
the temperature of an object (e.g. a milk
bottle).
Stop Watch
The built-in stop watch assists you with
checking the pulse. The heartbeat is an
important indicator of the vital functions of
the body.
Fever Alarm
When the thermometer detects a tem-
perature exceeding 37.5°C in the "Ear" mode,
it will sound an alarm. At first, you will hear a
long signal tone, then three short tones. This
is to warn the user of potential fever.
Memory
There are 9 memories for ear measurement
results. Each memory records the
measurement together with date/time/op-
eration mode/measuring point information.
°C / °F
Toggle
Please refer to the chapter "Use of the
Thermometer" to learn how to measure a
surface temperature.
Please refer to the chapter "Use of the
Stop Watch" for measuring the pulse.
When the device is on, press the "ON/
MEM" button. The symbol "
displayed and you can read the tempera-
ture value.
With the clock set first (see set clock),
the display shows "date, time and room
temperature". Press and hold the "SCAN"
key. Press and release immediately the
"ON/MEM" button. After 3 seconds, the
display will be switched from "°C" to "°F".
(The same way, you get back to "°C".)
" will be