System Settings; Time Settings - Philips DCR 9000 Benutzerhandbuch

EN
Auto
TV is 4:3 Letter box
Centre cut-out
TV is 16:9 Any setting
82
Case2:
Video via SCART
TV screen format is either 4:3 or 16:9
Broadcast is 4:3

13.5.2 System Settings

This screen is used to set your receiver audio/video output settings.
- Select values for the following:
• DVD/VCR SCART Output: select the EXT2 SCART output format supported
by your TV set and DVD/VCR (refer to your TV and DVD/VCR user manual for
more information)
• Dolby Digital: select ON to enable Dolby Digital sound
• Video/DVD Recorder Control: No, Prepare Record, or Record Link
depending on the control feature supported by your recorder (for more
information, refer to paragraph 14.3 of this manual or to your recorder user
manual)
• TV Audio: select Stereo or Mono depending the audio output format of your TV
• DVD/VCR Audio: select Stereo or Mono depending the audio output format of
your DVD/VCR
• Default Volume: select the volume level at wake-up.
- Press OK to confirm.

13.5.3 Time Settings

This screen is used to set the local time offset with respect to actual local time
retrieved from the network.
The offset setting is updated automatically.
1 Select the appropriate Time Offset with respect to GMT time.
2 Press OK to confirm and exit the screen, or EXIT to exit without storing the
changes.
Broadcast is 16:9