To Select Beep Tone Options; To Read The Cycle Counter - Panasonic NE-1027 Bedienungsanleitung

F. To Select Beep Tone Options:
The Beep Tone can be set, ON or OFF.
PAD
1.
2.
3.
0
4.
0
5.
G. To Read the Cycle Counter:
The oven can display the total number of times the oven has been operated cumulatively. This may be
used to analyze usage of the oven and traffic flow at the location.
PAD
1.
2.
+
How to Operate
≥Open the door.
≥Press the Program Pad. The display will not
change.
≥Press the Memory Pad 0.
≥Repeat pressing the Memory Pad 0. Select
"OFF" of Beep Tone.
Stage Indicator 1lON.
Stage Indicator 2lOFF.
≥Press the Program Pad again. You have
completed programming the beep tone.
≥2 seconds later, "0" will appear in the display.
≥Open the door.
≥While pressing Stop/Reset Pad, press Power
Level Pad. The display shows the total
cumulative number of times the oven has been
used.
Example:
9999 means the oven has been used
≥
999900–999999 times.
≥
0020 means the oven has been used
≥
2000–2099 times.
≥
If the total cumulative number of times is less
≥
than 100 tiems, the display will not be
≥
changed.
≥
≥2 seconds later, "0" will appear in the displey
window.
- 17 -
INSTRUCTION
INSTRUCTION
1
2
2