Neuinstallation/Hochrüsten
13.1 Mit Hilfe eines NCU Servicesystems
13.1.2.2
Automatisches Hochrüsten der CNC-Software mittels USB-FlashDrive
Ablaufdiagramm
Bild 13-9
Automatisches Hochrüsten der CNC-Software mittels USB-FlashDrive
Inbetriebnahme CNC: NCK, PLC, Antrieb
346
Inbetriebnahmehandbuch, 02/2012, 6FC5397-2AP40-3AA0