Operating Settings - AEG KD91405M Gebrauchsanweisung

CONTROL PANEL
All the appliance's control and
monitoring devices are placed together
on the front panel. The table beside
provides the key to the symbols used.

OPERATING SETTINGS

STAND-BY MODE
In this mode the whole system is
disconnected and no indicator light or
display is lit.
NORMAL OPERATION
In this mode the system is generating
heat. The display shows the remaining
operating time and the set temperature
alternating each 2 seconds. The Timer
and Temperature indicator lights light-
up alternating each 2 seconds and
coordinated with the display indication.
The Operation indicator light is
illuminated continuously until the Timer
reaches zero.
Timer indicator light
Temperature indicator light
Delayed Start indicator light
Display
Function / ON key
Up (increase) key
Down (decrease) / OFF key
Operation indicator light
To program the normal operation,
proceed as follows:
a) Press the "F" key once or several
times until the Timer indicator light
is flashing.
b) Press the "↑" or "↓" keys to set the
desired operation time in the range
0h00 – 4h00.
c) Press the "F" key to validate. The
Temperature indicator light starts to
flash.
d) Press the "↑" or "↓" keys to set the
desired temperature in the range
30 – 80ºC.
e) Press the "F" key for 3 seconds or
wait 5 seconds.
f) The Warming Drawer starts to
operate with the set parameters.
www.aeg.com
8