Inhaltsverzeichnis
Werbung
Calling up Presets
Selecting stations/RDS programmes
with the search function
PRESET
1. Select the "
" mode by repeatedly
TUNER FM
¢ ¢
and briefly pressing the right-hand
con-
1. Select the "
trol knob until the display briefly indicates
¡
the
button.
PRESET
"
" and then the PRESET sign.
2. Repeatedly and briefly press the right-hand
¢ ¢
2. Turn the right-hand
control knob to
¢ ¢
control knob until "
select the desired Preset.
briefly in the display.
¢ ¢
3. Turn the right-hand
The memory contents are maintained even
the search function in the desired direction.
when disconnecting the battery voltage.
The search function operates with two
different sensitivities. When exploring the
Erasing Presets
frequency range the first time, it searches
for stations with high field strength (local
To erase an occupied memory position (Pre-
¡
reception). When exploring the range the
set), briefly press the
button until the
second time, it searches also for stations
display indicates the STORE sign. Turn the
¢ ¢
with low field strength (distant reception).
right-hand
control knob to select the Preset
you wish to erase then press this knob until
4. If you wish to store the found stations on
two signals sound and the display indicates
Presets (memory positions), see page 7,
ERASED
for approximately two seconds "
".
"Allocating FM presets".
Manual frequency tuning
TUNER FM
1. Select the "
range.
Cassette
Selecting the TAPE programme source
Changing the cassette side
t
¡
Slide a cassette into the cassette compart-
Slightly press the
TAPE 1
ment. The display indicates "
", or
the same time. At tape end, the cassette side
changes automatically.
if a cassette is already inserted:
Indications in the display:
Repeatedly and briefly press the
¡
button
TAPE
TAPE 1
until "
" appears in the display.
"
" - upper cassette side
TAPE 2
"
" - bottom cassette side.
Tape run buttons
Fast forward and rewind
t
s
¡
¡
Press the
or
in. The display indicates after approximately
WIND
1.5 seconds "
" and the tape is wound in
the respective direction.
Aborting winding
t
s
¡
¡
Press the
or
C
Ejecting the cassette
t
s
¡
¡
Press the
and
same time completely in.
The cassette is ejected.
Radio
¢ ¢
2. Press the right-hand
control knob until
the second signal sounds and the display
indicates the red "MAN" sign and briefly
MANUAL
" range by pressing
"
".
¢ ¢
3. Turn the right-hand
control knob to the
left or to the right to change the frequency
SEARCH
" appears
in the corresponding direction in steps of
FM 92.70
50 kHz. The display indicates "
",
for example.
control knob to start
The right-hand
¢ ¢
control knob has a
"flywheel" function for fast tuning.
4. If you wish to store the found stations on
Presets (memory positions), see page 7,
"Allocating FM presets".
5. To terminate manual frequency tuning,
¢ ¢
press the right-hand
control knob.
TUNER AM
" or "
"
Ending cassette play
s
¡
and
button at
for example, to listen to the radio.
¡
Press the
button.
The cassette remains in its compartment!
Or eject the cassette.
We recommend not to leave the cassette in
its compartment for a long period of time
as this would expose the cassette to
increased stress.
button until it locks
The cassette player is optimized for CR
(chromium dioxide) cassettes.
When the TP function is activated, cas-
sette play will be interrupted during traffic
button half in.
announcements.
To abort a traffic announcement, briefly press
¡
the
button.
TP
buttons at the
Allocating AM Presets
Selecting AM stations with the
search function
15 Presets are available in the "
TUNER AM
range.
1. Select the "
" range (LW/MW) by
¡
repeatedly and briefly pressing the
1. Storing a selected station:
TUNER
button until the display indicates "
¡
Briefly press the
AM
":
sign is visible in the display.
MW
for Mediumwave appears "
", for Lon-
lW
¢ ¢
2. Turn the right-hand
gwave appears "
".
select the desired memory position (Preset)
2. Repeatedly and briefly press the right-hand
1 to 15.
SEARCH
¢ ¢
control knob until "
" appears
3. Confirm this by pressing the
briefly in the display.
¢ ¢
or the right-hand
control knob until the
¢ ¢
3. Turn the right-hand
control knob to start
signal sounds and the display indicates
the search function in the desired direction.
STORED
"
".
In the AM range (AM-TUNER), the search
function first scans the LW and then the
MW band.
Programme
Store
sources
SOUND
Select Preset
EXPERT Control Level
To make car radio operation as easy as possi-
Changing EXPERT settings
ble, numerous settings that you need only
once or occasionally are located in an additio-
1. Activate the EXPERT mode
nal control level (EXPERT).
¡
Press the
button until the signal
sounds. The display indicates briefly
EXPERT
"
".
EXPERT functions summary
Code setting
Display brightness
Security LED on/off
2. Select a setting
Sound signal on/off
Select the setting you wish to change.
Autom. LEARN on/off
Possible settings
...
Autom. change of regional prolgramme
Example (function 10):
on/off
Changing the maximum switch-on volume
Switching on/off with the ignition switch
Turn the left-hand
Muting during telephone mode
the display indicates the function with the
ONVOL 13
current value "
Input sensitivity for CD changer and DAT
mode
m
Volume limitation when switching on
Minimum volume level for traffic
announcements
3. Activate change
Time indication on/off
Briefly press the right
u
RDS synchronisation of clock on/off
The display indicates " CH " (CH = Change).
{
Time setting
Radio
Selecting AM stations manually
TUNER AM
"
1. Repeatedly and briefly press the right-hand
MANUAL
¢ ¢
control knob until "
" appears
briefly in the display.
¢ ¢
button. The STORE
2. Turn the right-hand
control knob to the
left or to the right to tune to the desired
frequency.
control knob to
3. If you wish to store the found stations on
Presets (memory positions), see "Alloca-
ting AM presets".
¡
button
After having selected a waveband, you will
hear the station last tuned to in this band
(Last-station-memory). Your radio remem-
bers the station you have tuned to before
switching off. When switching on again,
you will hear this station or the radio swit-
ches to TAPE/ MCD if this function was last
selected.
NEXT
CHANGER CONTROL
4. Change the setting
¢ ¢
Use the right-hand
control knob to
adjust the desired volume. The display
indicates, eg.:
Turn the right-hand
¢ ¢
control knob
to the right to increase the value or to
switch the function on.
to the left to decrease the value or to
{
switch the function off.
5. End the adjustment
control knob until
¢ ¢
Briefly press the right-hand
control
knob: " CH " disappears from the display.
".
6. Select the next setting
(Repeat the steps 2. through 5.).
7. Deactivate the EXPERT mode
¡
Press the
button or press the right-
¢ ¢
control knob.
¢ ¢
hand
control knob until the signal
sounds.
Werbung
Inhaltsverzeichnis
