Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Inserting the Batteries
Open the housing by loosening the three screws
1.
at the bottom side of the LED light. Use a suita-
ble slot screwdriver for unscrewing the screws
and turn counter clockwise.
2. Remove the lid.
3. Insert the batteries into the battery compartment
and observe correct polarity. The polarity sym-
bols are marked on the plastic holders.
4. Re-attach the warning light in reverse order.
Make sure the sealing ring is properly mounted.
Do not overtighten the screws in order not to
damage the article.
Batteries
household garbage.
For battery disposal, please check
with your local council.
Operation
do
not
11
belong
in
Werbung
