Transport; Troubleshooting; Waste Disposal And Environmental Protection; Error Correction - Parkside PTBM 500 D4 Originalbetriebsanleitung

G B I E
N I

Transport

Do not carry the bench drill
holding it on the motor unit.
Caution! Hot surface. There is a
risk of burns. Only transport the
machine when the motor unit
( 13) has cooled down com-
A B
pletely.
K L
If possible, carry the bench drill together
U V
with another person. Grip the baseplate
( 17) with one hand and stabilise the
A B C D
machine on the drive cover (
K L M N
other hand.
U V W X

Troubleshooting

Problem
Device doesn't
start
Strong vibrations
Loud squeaking
noise
1 6
CY
C D E
M N O
W X Y
E F G H
3) with the
A B
O P Q R
K L
Y Z
U V
Possible Cause
Emergency stop switch (5) has
been triggered
No mains voltage
Main circuit breaker is tripped
On/off switch (1/2) is broken Repair by Customer Care
Motor faulty
3
place
Bit not centrally clamped
V-belt tension is too high
Damaged V-belts (29)
Damaged pulley
Waste disposal
and environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
them.
F G H I
Electrical machines do not belong
P Q R S
with domestic waste.
Z
• Hand over the device at an utilization
location. The plastic and metal parts
I J
employed can be separated out and
C D E F
S T
thus recycled use can be implemented.
M N O P
Ask our Service-Center for details.
• Defective units returned to us will be
W X Y Z
disposed of for free.

Error correction

Reactivate the emergency stop
switch (5) by turning it. Press the on
switch (1) to restart the device
Check the socket, mains supply
cable, cord, mains plug; if necessa-
ry, have them repaired by a quali-
Check the main fuse
Repair by Customer Care
Check V-belt tension and tighten the
locking screw (12)
Check the bit in the drill chuck (4)
Check V-belt tension
Check V-belts (29)
Check pulleys
J
T
G H I J
Q R S T