Layout And Items Supplied; Proper Use; Technical Data; Before Starting The Equipment - EINHELL TE-HA 2000 E Originalbetriebsanleitung

2. Layout and items supplied

2.1 Layout (Fig. 1-3)
1. Nozzle
2. 4-setting On/Off switch
3. Power cable
4. Removable guard hood
5. LED display
6. Temperature setting wheel
7. Glass protection nozzle
8. Wide jet nozzle
9. Reducer nozzle
10. Refl ector nozzle
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Hot air gun
•
4x Nozzles
•
Original operating instructions
•
Safety instructions

3. Proper use

The hot air blower is designed for heating shrink-
fi t hoses, for removing paint and for welding and
shaping plastics.
Anl_TE_HA_2000_E_SPK1.indb 15 Anl_TE_HA_2000_E_SPK1.indb 15
GB
Danger!
The equipment is not allowed to be used to ignite
charcoal.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: .........................220-240 V~ 50 Hz
Power input: ............................................ 2000 W
Temperature: .............................. 50°C / Setting 1
............................................. 50-550°C / Setting 2
............................................. 50-550°C / Setting 3
Air volume: ........................... 250 l/min / Setting 1
.............................................. 250 l/min / Setting 2
.............................................. 500 l/min / Setting 3
Protection class: ............................................ II/
Weight: .......................................................0.9 kg

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.

6. Operation

Notice!
After you use the equipment for the fi rst time,
some smoke may escape from it. This is nor-
mal.
6.1 4-setting ON/OFF switch (Figure 3)
Select the required working temperature and air
volume with the ON/OFF switch (2).
Within a very short space of time the hot air
gun will reach operating temperature.
Switch position 1:
1st setting – 50°C / 250 liters/min.
- 15 -
14.01.15 15:07 14.01.15 15:07