Tips And Tricks - Parkside PDFW 120 A1 Originalbetriebsanleitung

Application examples/selecting a suitable tool:
Function
Milling
Polishing, rust removal
CAUTION!
Exert only slight pres-
sure when applying the
tool to the workpiece.
Cleaning
Grinding
Cutting
■ The maximum diameter of the assembled grinding bodies, grinding cones, pencil grinders with a
thread insert may not exceed 55 mm. The maximum diameter of sandpaper grinding accessories may
not exceed 80 mm.
NOTE
► The max. permissible length of a mandrel is 33 mm.
■ Store the accessories in the original box or store the accessory components somewhere else to protect
them from damage.
■ Store the accessories somewhere dry and not in the vicinity of aggressive media.

Tips and tricks

■ If you exert too much pressure, the fitted tool can break and/or the workpiece could be damaged. You
will achieve optimum working results by moving the tool over the workpiece at a steady speed and
while exerting light pressure.
GB │ IE │ NI │ CY
■ 14
│
Accessories
Milling cutters
Brass brushes
Polishing felts /
Cleaning brushes
Pencil grinders
Cutting discs /
Use
Various jobs; e.g. creat-
ing recesses, hollows,
forms, grooves or slits
Rust removal
Various metals and plas-
tics, especially precious
metals such as gold and
silver
e.g. cleaning hard-to-
access plastic housings
or the area around a
door lock
Grinding work on
stone, wood, fine work
on hard materials such
as ceramics or alloyed
steel
Working metal, plastic
and wood
Protrusion
(min–max) mm
18–25
9–15
12–18
9–15
10
12–18
PDFW 120 A1