Network­installation - Grundig G-BCAM-01 Bedienungsanleitung

NETWORK­INSTALLATION
Connect­the­camera­to­
the­home­network­and­
sign­in
In order to ensure that the camera
view is displayed on your TV screen
over the "BABYWATCH" applica-
tion, your TV and Camera should be
connected to the same network.
You can connect your camera to the
home network with the cabled "LAN"
or wireless "WLAN" connection.
If you are using a cabled "LAN"
connection, please refer to the part
titled "Connection of the camera
with the LAN connection..." in this
section;
If you want to use a wireless
network "WLAN", follow the instruc-
tions described in the section "Op-
eration on the Wireless Network"
"WLAN".
Warning:
Malicious software may pen-
7
etrate through your personal
local network via Internet and
abuse your audio-visual files.
For such situations, secure your
personal local network. Ensur-
ing the security of the personal
local network is under the re-
sponsibility of the user.
­ 2 4 ENGLISH
­ _ _________________
Connection­of­the­camera­
with­a­LAN­connection­
and­signing­in
Note:
Many home networks are Dy-
7
namic Networks. If you have
a dynamic network, you must
use a DSL modem that supports
DHCP. If the DHCP server of
the modem does not work, the
camera cannot receive an IP
address.
1
Switch on your television.
2 Select the »Quick Apps« menu
with »@«.
3
Select the »BabyWatch« applica-
tion with » « or »
V
with »OK«.
– »Help« page will be displayed
soon which shows how the in-
stallation will be made.
Camera Start
∙
∙
Plug in the camera adaptor to start set-up.
Power lamp in the front part of the camera will light up. Upper part of the camera will
∙
move after a while. .
Attach one end of the LAN cable to the camera and the other to the modem or router to
which the TV is connected. .
»
4 With the
<
page.
– Settings page will be displayed.
« and confirm
Λ
«, exit the Help
» «