Technical Data; Safety Instructions - Klarstein 10028295 Bedienungsanleitung

Dear Customer,
Congratulations on purchasing this Klarstein equipment. Please read this manual carefully
and take care of the following hints on installation and use to avoid technical damages. Any
failure caused by ignoring the mentioned items and cautions mentioned in the operation
and installation instructions are not covered by our warranty and any liability.
Item number
Power supply
• Never attach the fan to a power point, but to the ceiling itself.
• The minimum distance between the blades of the fan and the floor must be 2.3m. The
minimum carrying capacity of the hook from which the fan is hung must be 100kg.
• Make sure to install all poles disconnection switch having a contact separation of at least
3mm between poles in the supply wiring to the ceiling fan.
• Install only bulbs of the type intended for your fan.
• Switch off the power before connecting or repairing the fan.
• The fan must be properly grounded to avoid the risk of electric shocks.
• Never mount the fan in a moist or wet room.
• Be careful when working near the rotating blades.
• Always have your fan installed by someone who is knowledgeable about electrical wiring.
• This appliance is not intended for use by persons (including children) with reduced physical. Sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safe-
ty. Page 1 of 3 Children should be supervised to ensure that they do not play with the appliance.
5

Technical Data

10028295, 10028296
220-240 V ~ 50-60 Hz

Safety Instructions

Mounting
1. Locate and mark the canter of the joist. Pass
the supply wires throught the hole in the bra-
cket. Secure the bracket to the ceiling joist by
using the flat washers, sping washers and wood
screws.