Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Possible Cause - Panasonic EH-XT20 Bedienungsanleitung

The enhancer microcurrent 3-in-1
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27

Troubleshooting

Problem
The power does not turn on even after
the POWER/SELECT switch is pressed.
The charging indication/notification
lamp (
) does not turn on or goes out.
The mode function display lamp
(orange) blinks.
The power turns off during use.
The appliance can only be used for a
few minutes after charging.

Possible cause

The appliance has not been charged.
The AC adaptor is connected.
This lamp turns off after charging is complete.
(See page 15.)
The adaptor is not inserted into the household
outlet correctly.
The appliance plug is not firmly inserted into
the socket.
The protection function has operated in the
main body, and the appliance has stopped
abnormally.
The power will be automatically turned off
after each mode is completed.
There is no power remaining in the battery.
The appliance will automatically turn off if you
do not touch the microcurrent panel or apply
the titanium head to the skin for approximately
20 seconds. (Except for AUTO mode cooling
or COOLING mode)
The battery has reached the end of its life.
(approximately 3 years) (See page 25.)
Action
Charge the appliance.
(See page 15.)
Disconnect the AC adaptor before use.
Correctly insert the adaptor into the
household outlet.
Firmly insert the appliance plug into
the socket.
Turn off the power and turn it back on
again after some time has passed.
If the symptom occurs repeatedly,
contact an authorized service centre.
Charge the appliance.
(See page 15.)
Turn on the power, re-select the mode
and use the appliance, applying it to
the skin.
Please contact the store where
purchased.
(Customers cannot replace the battery
as doing so may cause malfunction.)
23

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis