Preparation; Connections - Panasonic KX-TS730EX Bedienungsanleitung

E-TS730EX.book 7 ページ ２００５年１１月１１日 金曜日 午前１０時１０分

Connections

1
2
Fasten the AC
Fasten the
adaptor cord.
interface cable.
Bottom of the
interface box
Note:
L Use only provided Panasonic AC adaptor PQLV206E (9 V/750 mA) or PQLV206CE (9
V/750 mA) for proper product operation. In case of power failure, this product will not
work.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L Never install telephone wiring during a lightning storm.
Interface cable
AC adaptor
PQLV206E
(For UK, R.O.I.
and countries
where an UK type
plug is used)
Hooks
Telephone line cord

Preparation

Interface box
To disconnect the
interface cable, pull
out the cable while
pushing the tabs.
AC adaptor
PQLV206CE
(For other
countries)
OR
To Household Mains Supply
(PQLV206E: 220 - 240 V AC, 50/60 Hz)
(PQLV206CE: 100 - 240 V AC, 50/60 Hz)
To telephone
network
7