Removing and attaching the sewing foot holder
Maintaining the sewing machine
EN-32
The sewing foot holder does not need to be removed unless you
want to darn or embroider, or make space to clean the fabric
feeder (27).
Removing
• Move the needle to its highest position by turning the hand
wheel (10) towards you and raise the sewing foot lever (15).
• Remove the foot from the sewing foot holder and loosen the se-
wing foot holder screw using the screwdriver provided.
Attaching
• Move the needle to its highest position by turning the hand
wheel (10) towards you and raise the sewing foot lever (15).
• When you attach the sewing foot holder, push it upwards as far
as possible and tighten the sewing foot holder screw using the
screwdriver provided.
The sewing machine is a sensitive mechanical product and requires
regular maintenance to ensure it always functions perfectly.
You can carry out this maintenance yourself.
Above all, maintenance means cleaning and oiling.
NOTE
Only use high-quality sewing machine oils. Other oils are not suita-
ble.
Please note that after oiling, there may be oil residue in the machine.
To get rid of this residue, sew a few stitches on a swatch or scrap of
fabric. This will stop your actual fabric from getting soiled.