Herunterladen Diese Seite drucken

Sony CFD-V10 Bedienungsanleitung Seite 2

Cd radio cassettecorder

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Location of controls
CD compartment
Tape compartment
6 OPEN/CLOSE
Display window
Dial scale
Speaker
TONE
TUNE
2 (headphones)
FUNCTION
VOLUME
OPR/BATT
Playing a CD
1
Set FUNCTION to CD.
2
Press 6OPEN/CLOSE down to open
the CD compartment and place a CD
on the CD compartment.
With the label side up
3
Close the compartment.
4
P r e s s ^ .
Display
The player plays all
the tracks once.
Track number
To
Do this
Adjust the volume
Turn VOLUME.
Adjust the tone
Turn TONE.
Stop playback
Press p.
Pause playback
P r e s s ^ .
Press again to resume
play after pause.
Go to the next track
P r e s s + .
Go back to the previous track
P r e s s = .
Locate a point while listening
Press + (forward) or
to the sound
= (backward) while
playing and hold down
until you find the point.
Remove the CD
Press 6 OPEN/CLOSE.
Turn off the player
Set FUNCTION to
TAPE (CD/RADIO
OFF).
Listening to the radio
1
Set FUNCTION to FM or AM.
2
Turn TUNE to tune in a radio staton.
If the received FM stereo is too weak, the
reception becomes monaural.
To
Do this
Adjust the volume
Turn VOLUME.
Adjust the tone
Turn TONE.
Turn off the radio
Set FUNCTION to
TAPE (CD/RADIO
OFF).
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself
for AM.
For FM
For AM
Tip
To receive an FM stereo program (only for the models
equipped with FM MODE/ISS selector at the rear)
Set the FM MODE/ISS selector at the rear to STEREO. If the
FM broadcast is noisy, set the selector to MONO and the
radio will play in monaural.
Use TYPE I (normal) tape only.
Playing a tape
1
Set FUNCTION to TAPE
(CD/RADIO OFF).
2
Press p6 to open the tape compartment
and insert a recorded tape. Close the
compartment.
With the side you want to
play on facing upward.
3
P r e s s ( .
To
Do this
Adjust the volume
Turn VOLUME.
Adjust the tone
Turn TONE.
Stop playback
Press p6 .
Fast-forward or rewind the
P r e s s ) o r 0 f o r
tape
the side facing
upward
Pause playback
Press P.
Press the button again
to resume play after
pause.
Eject the cassette.
Press p6.
Use TYPE I (normal) tape only.
Recording
1
Insert a blank tape.
With the side you want to
record on facing upward.
2
Select the program source you
want to record.
To record from the CD player, set
FUNCTION to CD and insert a CD.
To record from the radio, set
FUNCTION to FM or AM and tune
in the station you want.
3
Press r (( is depressed automatically.)
To
Press
Stop recording
p 6
Pause recording
P
Press the button again
to resume recording
after pause.
Tips
• Adjusting the volume or the tone will not affect the
recording level.
• If the AM program makes a whistling sound after you've
pressed r in step 3, set the FM MODE/ISS (Interference
Suppress Switch) at the rear to the position that most
decreases the noise (only for the models equipped with
FM MODE/ISS selector at the rear).
• For best results, use the AC power as a power source for
recording.
• To erase a recording, proceed as follows:
1 Set FUNCTION to TAPE (CD/RADIO OFF).
2 Press r.
Notes on cassettes
• Break off the cassette tab from side A or B to prevent
accidental recording. If you want to reuse the tape for
recording, cover the broken tab with adhesive tape.
Side A
Tab for side A
Tab for side B
• The use of a cassette with more than 90 minutes of play
time is not recommended except for long, continuous
recording or playback.

Werbung

loading

Diese Anleitung auch für:

Cfd-910